Iron Clubs Best Irons Golf

Golf Iron Review

Golf Iron Review

Golf shaft question. Rifle vs TC?

I currently have the Flighted Project X 6.0 in my Mizuno irons. I've been wanted to get the True Temper TC shafts but they only come in Stiff and X-stiff. I'm pretty sure I swing too hard for stiff but I'm not sure about X-stiff. If it was you that was getting these shafts, would you soft step them or just leave them how they are? Any reviews on these irons are greatly appreciated. The website for them is www.tttourconcept.com.
I have 6.0's now which are a step above stiff which is the 5.5 frequency. The TC shafts are steel with an anti glare coating. It comes in blue, silver, and green

I think depending on the tip parallel on the True Temper TC shafts you could get stiff shafts and tip them, and that will increase the stiffness. This works for driver shafts as I have a tipped UST Proforce V2 in my driver (I needed it tipped because of the stiffness that I needed, but it would have had to be tipped anyway because of my driver's bore-thru hosel). I'm not sure if you can do this with irons though...

Also, they make Project X and Project X Flighted shafts in 6.5 frequency, so in between stiff and x-stiff. That means you could just get the set of shafts and put them in without soft stepping them or tipping them. It may be a bit expensive to get the 6.5 frequency shafts though...I don't think they're that common. You would have to order them or go to a specialized distributor.

P.S. Are the True Temper TC shafts graphite or steel? On the website it kinda looks like they are graphite, but have steps. Are they steel with a coating on them to reduce glare? Same idea as the KBS wedge shafts?

Titleist AP1 and AP2 2009 Iron Review by Golfalot.com

Compare________________________________________________

Nicklaus Golf HCT Individual Iron $49.95 Nicklaus Golf HCT Individual Iron

Callaway Golf Iron Covers $39.99 Callaway Golf Iron covers provide excellent protection for all irons. They are easy to get on and off, and fit both right and left handed clubs.

Momentus Golf XL Iron $59.95 Momentus Golf XL Iron The XL Iron is the 21st Century version of those earlier fan-shaped resistance training aids. The XL Iron gives you incredible resistance training both in your back swing and through swing while it teaches you to keep the club face square at all times. Because the XL Iron only has one blade versus earlier resistance training aids that had four blades, it forces you to square the club face up at impact correctly every time. The extreme size of the XL Iron's club face gives you the heightened visual awareness of the club face angle. You will be keeping the club face square while building tremendous power in your golf swing through repetitions with the XL Iron. Instructional DVD Golf Fitness Workout Poster Included.

Callaway Golf Oversize Iron Covers $49.99 Protect your irons with the Callaway Golf iron covers. Sleek design looks great in your bag.

Scratch Golf AR-1 Iron Set $1099.95 Scratch Golf AR-1 Iron Set Scratch AR-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The AR-1 irons are designed to offer maximum playability and forgiveness in a cavity back with the looks of a traditional muscle back blade at address. The center of gravity is in the center of the face and further back towards the trailing edge. The cavity design is progressive and has a lower COG in the long irons to help get the ball in the air. Scratch Golf AR-1 Iron Heads Scratch AR-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged traditional cavity back irons in golf, customized for your game. The headshape of the AR-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch Golf AR-1 Iron Grooves The AR-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch Golf AR-1 Iron Finish AR-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the AR-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch Golf AR-1 Iron Heads Scratch Golf AR-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots

Scratch Golf EZ-1 Iron Set $1099.95 Scratch Golf EZ-1 Iron Set Scratch Golf EZ-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The EZ-1 irons are designed for absolute maximum forgiveness in a one piece forged head. The center of gravity is very low and far back towards the trailing edge. The blade is longer from heel to toe and the weight is pushed far out towards the edges of the club. This makes the EZ-1 irons as forgiving as any of the larger oversized irons on the market today. Despite their extreme forgiveness and playability the EZ-1 irons retain a traditional look at address with a thin topline and classic shape. Scratch Golf EZ-1 Iron Heads Scratch EZ-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged traditional cavity back irons in golf, customized for your game. The headshape of the EZ-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch Golf EZ-1 Irons Grooves The EZ-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch Golf EZ-1 Iron Finish EZ-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the EZ-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch Golf EZ-1 Iron Shafts Scratch EZ-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots.

________________________________________________________

Be Sociable, Share!

•