Iron Clubs Best Irons Golf

Golf Iron Shaft Lengths

Golf Iron Shaft Lengths

What are my used LH Northwestern golf clubs worth?

Tom Weiskopf edition clubs. Great beginner’s set. Irons include 3, 4, 5, 6, 7, 8, 9, and PW. Woods include driver and 3. All grips are in good condition and club heads have little wear and tear. Iron shafts are Northwestern Pro-Flex and in very good condition.
Club Lengths:
3W-42.25”
3I-38”
4I-37.75”
5I-37”
6I-36.5”
7I-36.25”
8I-36”
9I-35.25”
PW-35”

I’m looking to sell because I got a new set. These were very good clubs for me and enjoyed using them for about ten years.

They're worth next to nothing to be honest. Northwestern is a entry level set as it is, and those do not sound like clubs that have been made in years, if not decades.

There's a set on ebay right now. They're listed at $10 and have no bids.

Vintage vs. Modern Irons

Account limit of 2000 requests per hour exceeded.

[phpzon]Golf Iron Shaft Lengths, 3, HomeGarden[/phpzon] [phpzon]Golf Iron Shaft Lengths, 4, Books[/phpzon] [phpzon]Golf Iron Shaft Lengths, 3, All[/phpzon]

Compare________________________________________________

Distance Master Steel Iron Shaft $3.79 Excellent,cost-efficent iron shaft alternative for clubmakers. Great steel shaft choice for hybrids.

GolfWorks MPF Iron Shaft $14.97 MPF shafts are Ultra light iron shafts designed to maximize distance. Softer tip section, combined with low bend point optimize trajectory.

Aldila Value Series Iron Shaft $12.99 These 100% graphite shafts have been designed for beginning through above average golfers. The V2000 Plus is a new 100% frequency matched shaft.

Cleveland CG16 Satin Chrome Iron Set $499.95 Cleveland CG16 Satin Chrome Iron Set The CG16™?irons are designed with a lighter overall club weight and longer club length for maximum distance. The large cavity back, with its full undercut, stretches the center of gravity low and deep to optimize launch angle and significantly improve forgiveness.? The large, thin face allows for increased COR and maximum ball speed that will produce distance that competes with any iron set in the market ? but with increased control.? Available with lightweight steel or graphite shafts, the CG16™?irons are offered in either a Satin Chrome or Satin Chrome finish. Laser Milled Authentic precision Laser Milled Face and milled Tour Zip Grooves. Optimizes spin and shot consistency especially from the rough Large Thin Face Large thin face for increased ball speed, wide sole for consistent turf interaction, and full cavity back design with undercut for high MOI . Maximizes distance and accuracy even on off-center hits. Wider sole design for added forgiveness. Ultra Lightweight Ultra-lightweight steel and graphite shaft designs combined with optimized head weights, lofts and club lengths. Improves clubhead speed and distance while maintaining standard swing weights and control. #d { font-family: Arial, Helvetica, sans-serif; } Specs: Cleveland Golf CG16 Satin Chrome Iron Set Iron Loft Lie Length Swing Weight Offset Value Steel Graphite Steel Graphite *3 19.00° 60.00° 39.75 40.00 D3 D2 .240 *4 21.00° 60.75° 39.125 39.375 D3 D2 .210 *5 24.00° 61.50° 38.50 38.75 D3 D2 .180 *6 27.00° 62.25° 37.875 38.125 D3 D2 .160 *7 31.00° 63.00° 37.25 37.50 D3 D2 .140 *8 35.00° 63.50° 36.75 37.00 D3 D2 .120 *9 39.00° 64.00° 36.25 36.50 D3 D2 .105 *PW 44.00° 64.50° 35.75 36.00 D4 D3 .090 *Available Left Handed Shaft : Steel - Traction 85 Shaft, Ultra-lightweight steel shaft Graphite: Actionlite 55 Shaft, Ultra-lightweight grap

Cleveland CG16 Black Pearl Iron Set $499.95 Cleveland CG16 Black Pearl Iron Set The Cleveland CG16 Black Pearl irons are designed with a lighter overall club weight and longer club length for maximum distance. The large cavity back, with its full undercut, stretches the center of gravity low and deep to optimize launch angle and significantly improve forgiveness. The large, thin face allows for increased COR and maximum ball speed that will produce distance that competes with any iron set in the market ? but with increased control. Available with lightweight steel or graphite shafts, the Cleveland CG16 irons are offered in either a Black Pearl or Satin Chrome finish. Laser Milled Authentic precision Laser Milled Face and milled Tour Zip Grooves. Optimizes spin and shot consistency especially from the rough Large Thin Face Large thin face for increased ball speed, wide sole for consistent turf interaction, and full cavity back design with undercut for high MOI . Maximizes distance and accuracy even on off-center hits. Wider sole design for added forgiveness. Ultra Lightweight Ultra-lightweight steel and graphite shaft designs combined with optimized head weights, lofts and club lengths. Improves clubhead speed and distance while maintaining standard swing weights and control. #d { font-family: Arial, Helvetica, sans-serif; } Specs: Cleveland Golf CG16 Black Pearl Iron Set Iron Loft Lie Length Swing Weight Offset Value Steel Graphite Steel Graphite *3 19.00° 60.00° 39.75 40.00 D3 D2 .240 *4 21.00° 60.75° 39.125 39.375 D3 D2 .210 *5 24.00° 61.50° 38.50 38.75 D3 D2 .180 *6 27.00° 62.25° 37.875 38.125 D3 D2 .160 *7 31.00° 63.00° 37.25 37.50 D3 D2 .140 *8 35.00° 63.50° 36.75 37.00 D3 D2 .120 *9 39.00° 64.00° 36.25 36.50 D3 D2 .105 *PW 44.00° 64.50° 35.75 36.00 D4 D3 .090

Scratch Golf AR-1 Iron Set $1099.95 Scratch Golf AR-1 Iron Set Scratch AR-1 Irons are forged from the same soft 1018 carbon steel as our wedges. The AR-1 irons are designed to offer maximum playability and forgiveness in a cavity back with the looks of a traditional muscle back blade at address. The center of gravity is in the center of the face and further back towards the trailing edge. The cavity design is progressive and has a lower COG in the long irons to help get the ball in the air. Scratch Golf AR-1 Iron Heads Scratch AR-1 irons are forged from 1018 carbon steel, the softest steel used by anyone making golf clubs today. The raw heads are then ground and finished completely by hand. The end result is the finest hand made forged traditional cavity back irons in golf, customized for your game. The headshape of the AR-1 irons was inspired by Scratch's work with Tour Pros from around the globe. Specific attention was paid to the transition from the middle irons to the short irons to assure perfect flow throughout the set from the 3 iron down to the PW. Scratch Golf AR-1 Iron Grooves The AR-1 irons feature our new 2010 "Condition of Competition" legal V grooves. These grooves are legal for play in any tournament in the world so you never have to worry about taking your favorite set of Scratch irons out of the bag because the groove rule has changed. These grooves are designed to have the maximum amount of groove surface while still adhering to the new USGA rules. This reduces flier lies and provides more consistent spin and performance. Scratch Golf AR-1 Iron Finish AR-1 irons feature Scratch?s Brushed Satin finish. This finish provides the durability of chrome with a duller surface to help eliminate glare. The minimal stampings of the AR-1 irons provide a very clean look unique to the Scratch Golf brand and allow for personal stampings to be added to customize the clubs for the player. Scratch Golf AR-1 Iron Heads Scratch Golf AR-1 irons feature the KBS Tour as our standard shaft. These shafts are designed by legendary shaft designer Kim Braley and are the culmination of his years of shaft design experience. These shafts have a slightly higher launch angle but a more boring ballflight overall. This makes them easier to swing and more forgiving while also giving them better ballflight into the wind. They feature a consistent taper design in a stepped shaft and are more workable and have better feel on partial shots

________________________________________________________

Compare________________________________________________

PING EYE BLACK DOT 3 IRON STOCK PING ZZ LITE STEEL SHAFT STD LENGTH GOLF CLUB $9.99

MAC GREGOR MT 7 Iron Demo Set (16) Irons - Varying Shafts/Lengths/Lies/Heads $249.99

________________________________________________________