Iron Clubs Best Irons Golf

Golf Irons Backspin

Golf Irons Backspin

On a scale of 1 to 10, how hard is it to put some serious backspin on a golf ball?

Like on a typical par 3 with a 7 iron. How hard would it be see about 2 feet of backspin when your ball lands on the green? Any answers on this would be most appreciated. Thanks! ^-^

Respectfully,
GrayFox

That depends. There are several factors to account for. Swing speed is the most important factor. The faster the swing the more spin. Also, a steeper, descending strike will impart more spin than a shallow swing. Also, playing a ball that has a soft cover (E.G. Titleist Pro V) rather than a "distance" ball will help you get spin. Another factor is softness of the steel of your clubs forged carbon steel is softer and will give you more spin than club that was cast. Short irons spin balls more than long irons. A ball will spin more on a uphill lie. Shooting into the wind will get more spin. Also, a swing that hinge in the wrist gives more spin. These are a few of the factors that factor in to getting spin. The physics of golf is rather complicated. If you meet most of the criteria that I listed then it wouldn't be hard (3 out of 10). If you don't meet most of the criteria it would be harder (7 out of 10). I hope that this helps.

Backspin with a 9 Iron

Account limit of 2000 requests per hour exceeded.

[phpzon]Golf Irons Backspin, 3, HomeGarden[/phpzon] [phpzon]Golf Irons Backspin, 4, Books[/phpzon] [phpzon]Golf Irons Backspin, 3, All[/phpzon]

Compare________________________________________________

Williams Golf Players FW32 Polesitter Irons 3-PW $1799.95 Williams Golf Players FW32 Polesitter Irons The Polesitter iron series was designed with a target on the better player. This iron is precision forged with the highest grade of steel. The iron is designed with thinner top lines and narrower soles to produce the type of look that better players long for. This iron features Densimet, a Formula 1 specific weighting system that features the second heaviest metal in the world. The combination of precision forging with the Densimet weight systems, produces the feel and playing characteristics that better players long for. The Player Series is aimed at the core global golfer. This line is the lifeline of the Williams Sports product line. This series will feature equipment designed for the everyday golfer that seeks the highest in quality and performance from their equipment. This line will be the platform for all series of equipment that Williams Sports produces. This series will target 75% of the global golfing population and will set the bar for bar of excellence in the golf industry in all aspects of design, performance, and production. DENSIMET Densimet is a unique metal that is new to the golf industry and a by product of the Williams F1 technology. Densimet is the second heaviest metal in the world and is used in the FW32 race car to bring the car up to the minimum race weight, while also being used to provide additional traction based on the drivers style of driving. Traditionally golf manufacturers have used Tungsten for weighting, but the Williams Sports entire product line will utilize Densimet for its weighting purposes pushing the limits of technology used in our equipment. This advance in material allows Williams Sports to maximize design capabilities enhanced the by the reduced volume needed for Densimet usage instead of Tungsten or other materials. This is just another way that Williams Sports is bringing F1 technology to golf. Specs Club Loft  deg Lie  deg Bounce Swing Weight Grip Length  in 3 18 60.0 0 D0 Williams Dual Density 38.75 4 20 60.5 1 D0 Williams Dual Density 38.25 5 25 61.0 1 D0 Williams Dual Density 37.75 6 29.5 62.0 2 D0 Williams Dual Density 37.25 7 34 62.5 2 D0 Williams Dual Density 36.75 8 38 63.0 3 D0 Williams Dual Density 36.25 9 42 63.5 4 D0 Williams Dual Density 35.75 PW 46 64.0

Williams Golf Players FW32 Qualifier Irons 3-PW $1499.95 Williams Golf Players FW32 Qualifier Irons The Qualifier iron series also feature design elements that originated from the Williams team of engineers. This iron is constructed from a material similar to Iconel, which is used in the exhaust systems of the Williams race cars. This material has a molecular structure that provides for exceptional strength and durability, which increase the longevity and durability to golfer, without compromising feel. This iron also incorporates Densimet into its weighting system, used to maximize perimeter and performance weighting capabilities. This iron features either the Nippon 950 steel shaft and the Fujikura flow weighted graphite shaft. The Qualifier Series was designed with all levels of golfers in mind. The Player Series is aimed at the core global golfer. This line is the lifeline of the Williams Sports product line. This series will feature equipment designed for the everyday golfer that seeks the highest in quality and performance from their equipment. This line will be the platform for all series of equipment that Williams Sports produces. This series will target 75% of the global golfing population and will set the bar for bar of excellence in the golf industry in all aspects of design, performance, and production. The Qualifier iron series also feature design elements that originated from the Williams team of engineers. This iron is constructed from a material similar to Iconel, which is used in the exhaust systems of the Williams race cars. This material has a molecular structure that provides for exceptional strength and durability, which increase the longevity and durability to golfer, without compromising feel. This iron also incorporates Densimet into its weighting system, used to maximize perimeter and performance weighting capabilities. This iron features either the Nippon 950 steel shaft and the Fujikura flow weighted graphite shaft. The Qualifier Series was designed with all levels of golfers in mind. DENSIMET Densimet is a unique metal that is new to the golf industry and a by product of the Williams F1 technology. Densimet is the second heaviest metal in the world and is used in the FW32 race car to bring the car up to the minimum race weight, while also being used to provide additional traction based on the drivers style of driving. Traditionally golf manufacturers have used Tungsten for weighting, but the Williams Sports entire product line will utilize Densimet for its weighting purposes pushing the limits of technology used in our equipment. This advance in material allows Williams Sports to maximize design capabilities enhanced the by the reduced volume needed for Densimet usage instead of Tungsten or other materials. This is just another way that Williams Sports is bringing F1 technology to golf. Sp

Nike VR_S Forged Irons $999.95 Nike VR_S Forged Irons Our most technically advanced forged irons combine high-speed performance and meticulous craftsmanship for longershots and better feel. Our highest COR face in a forged iron, and a design that moves weight off the face, combined tooptimize launch for higher, straighter shots and maximum carry. It's the iron that puts speed at a premium. Features: Nike Golf VR_S Forged Irons Speed that Leads: Constructed of high-strength, ultra-thin stainless steel with NexCOR variable face-thickness technology, the VR_S clubface delivers a high COR face for more distance. The new face construction expands the maximum COR zone around the middle and lower area of the face where the majority of iron shots struck Designed for Distance: By positioning weight off the face with an undercut construction, the Nike PowerBOW technology produces a faster, higher launch for maximum carry, straighter ball flight and steeper descent to hold greens. Speed Plus Constrol: At a mere 90 grams, Dynalite 90 steel shafts feature ultimate control even with increased swing speed. Specifications: Nike Golf VR_S Forged Irons Club Hand Loft Length Lie Angle Bounce Offset Head Wt. Swing Wt. SteelGraphite 3 RH 20? 39 60? 2.0? 0.230 243.0g C9-D1 4 RH 22? 38.5 60.5? 2.0? 0.190 249.5g C9-D1 5 RH 25? 38 61? 3.0? 0.180 256.0g C9-D1 6 RH 28? 37.5 61.5? 4.0? 0.170 262.0g C9-D1 7 RH 31? 37 62? 4.0? 0.160 268.5g C9-D1 8 RH 35? 36.5 62.5? 5.0? 0.140 275.0g C9-D1 9 RH 40? 36 63? 6.0? 0.120 281.5g C9-D1 PW RH 45? 35.75 63.5? 7.0? 0.100 286.0g C9-D1 AW RH 51? 35.5 63.5? 9.0? 0.100 291.0g C9-D1 SW RH 56? 35.25 64? 9.0? 0.080 300.0g D1-D3 Shaft: Nippon N.S. Pro 850GH HT Flex Weight Torque Tip OD Butt OD Trajectory S 98.0g 1.7? .355 Taper .600 HIGH R 94.5g 1.9? .355 Taper .600 HIGH

Williams Golf Gold Series FW32 Qualifier Irons 3-PW $2999.95 Williams Golf Gold Series FW32 Qualifier Irons The Qualifier iron series also feature design elements that originated from the Williams team of engineers. This iron is constructed from a material similar to Iconel, which is used in the exhaust systems of the Williams race cars. This material has a molecular structure that provides for exceptional strength and durability, which increase the longevity and durability to golfer, without compromising feel. This iron also incorporates Densimet into its weighting system, used to maximize perimeter and performance weighting capabilities. This iron features either the Nippon 950 steel shaft and the Fujikura flow weighted graphite shaft. The Qualifier Series was designed with all levels of golfers in mind. The Gold Series from Williams Sports will target the golfer that is looking for something outside the traditional realm of golf club styling. This series will share the same technological and aerodynamic advancements that are the core foundation of the entire Williams Sports line. The Gold Series will separate itself from the other series by modifications to the cosmetics and finish of each product. The most noticeable and recognized difference will the exquisite 24 karat gold plating on all exposed metal surfaces. To compliment this finish, we have chosen a rich metallic color to bring out the luster of the gold plating. The Gold Series will be the perfect choice for the golfer that is looking for the combination of luxurious styling in a ultra-high performance product designed to perform at the high level. Features INCONEL Inconel is a nickel based material that is used by the Williams F1 team of engineers in their production of exhaust parts for the FW32 race car. Inconel is effective because of its ability to withstand extreme temperatures while maintaining its structural integrity. The key benefit that steams from this material is the fact it has a higher tensile strength than stainless steel, but due to its nickel base provides for a softer feel. This material is typically used in a machine or forging application which works well for golf equipment. All of these key attributes combined provide the reasoning for Williams Sports use of Inconel as its baseline material for the entire Qualifier series of irons. DENSIMET Densimet is a unique metal that is new to the golf industry and a by product of the Williams F1 technology. Densimet is the second heaviest metal in the world and is used in the FW32 race car to bring the car up to the minimum race weight, while also being used to provide additional traction based on the drivers style of driving. Traditionally golf manufacturers have used Tungs

IZZO EZ-2 Irons and Z-Brids Set $299.95 IZZO EZ-2 Irons and Z-Brids Set Game Improvement Irons Hybrids The best design, the best technology. Izzo Irons make golf easy. Made to eliminate slicing and promote straighter ball flight, these clubs have terrific feel and can improve your game. EZ-2 Iron set with Z-brids comes with irons 5-PW, 21º 24º Z-Brids Features Iron sets come with irons 5-PW Clear-cut channel with variable notch weighting for higher, straighter flight Generous bounce with wide sole makes EZ-2 very forgiving Offset head minimizes slicing Slightly heavier swing weight improves timing - adds more distance with less effort Irons made from Soft 692 steel for soft buttery feel Z-Brids: Catamaran sole design maximizes MOI and improves ball flight Square head is easy to align and aim Rounded sole promotes better contact from uneven lies Specs Loft deg Lie deg Bounce Angle deg Length in Swingweight EZ-2 Irons 4 24 60.5 2.0 38.75 D3 5 27 61.0 2.5 38.25 D3 6 30 61.5 3.0 37.75 D3 7 34 62.0 4.0 37.25 D3 8 38 62.5 5.0 36.75 D3 9 42 63.0 6.0 36.25

Adams Men's Idea MB2 Irons - 3-PW (Steel) $999.99 Are you a serious golfer with a seriously low handicap? The Idea MB2 Irons are specifically designed with better players in mind.

________________________________________________________

Compare________________________________________________

Rougher Backspin Tool & Handle for VR Split Cavity iron $22.95

Rougher Backspin Tool & Handle for Ping G2 irons $22.95

GV1 Backspin tool & handle for Cleveland CG1 golf Irons $22.95

GOLF CLUB REGROOVING SHARPENER TOOL - IRONS & WEDGE CLUB CLEANER MORE BACKSPIN $22.95

Rougher Backspin Tool & Handle for Ben Hogan BH-5 Iron $22.95

Rougher Backspin Tool & Handle for Slingshot 4D Irons $22.95

Rougher Backspin Tool & Handle for Cobra S9 Iron set $22.95

Our regrooving process gives your PING irons more bite- Adds backspin to balls $25.00

UV Golf Backspin Tool & Handle for Ping Zing Wedge iron $22.95

UV Golf Backspin Tool & Handle for Ping S59 Iron wedge $22.95

Backspin Buddy golf groove sharpener for Lynx Irons $19.99

UV Golf Backspin Tool For MIZUNO MP-52 irons $22.95

UV Backspin Tool & Handle for Adam Idea Pro 18 irons $22.95

UV Golf Backspin Tool & Handle for Ping Rapture V2 iron $22.95

GV1 Backspin tool & handle for Ping G15 irons or wedge $22.95

UV Backspin Golf Tool & Handle for Srizon Z-TX irons $22.95

Backspin Buddy wedge & iron groove sharpener & cleaner $19.99

UV Backspin Tool & Handle for Titleist SX86 BLK irons $22.95

UV Backspin Tool & Handle for Adam Idea Pro 18 irons $22.95

UV Backspin Tool & Handle for Srixon Z-Steel 14.5° iron $22.95

UV Golf Backspin Tool & Handle for Srixon Z-Star irons $22.95

UV Golf Backspin Tool & Handle MIZUNO MP-52 irons $22.95

UV Golf Backspin Tool & Handle MIZUNO MP-62 irons $22.95

UV Golf Backspin Tool & Handle for Cobra SZ Irons $22.95

UV Golf Backspin Tool & Handle for Ping Rapture V2 iron $22.95

UV Golf Backspin Tool & Handle for VR Full Cavity irons $22.95

UV Golf Backspin Tool & Handle for VR Split Cavity iron $22.95

UV Golf Backspin Tool & Handle VR Forged TW Blade irons $22.95

UV Golf Backspin Tool & Handle for Mizuno MX-100 irons $22.95

UV Golf Backspin Tool & Handle for Mizuno MX-200 irons $22.95

________________________________________________________